If you have done that, you would need to use an RGB software instead or connect the fans to the controller.ģ: If the two above steps are done, you can try and disconnect the fans that are chained together and connect them separately to the controller. Note that since this isn't connected in any way to the motherboard, the fans will not change color if connected directly to a motherboard RGB header. If this isn't connected or loose, the fans can act up.Ģ: Make sure that the fans are properly connected to the fan hub. If the controller isn't working as intended, as in if the fans are dimmed or just don't light up/change color when using the controller, please follow the below steps.ġ: Make sure that the SATA-cable coming from the RGB controller is properly connected to the PSU SATA connector. The RGB controller in the Focus 2 works the same way, but with different color variations: Note that the Northern Lights mode disables any color change, as it has its own color theme.īelow video displays how to change the different modes on the Pop RGB controller. By just pressing and releasing the button straight away, you change the color of the LEDs. By pressing and holding in the button for 2 second, you can change the mode in which it lights up. The right image indicate how you change the mode and colors on the controller. If connecting the fans to the motherboard instead, note that the SATA-cable still needs to be connected to the PSU since the power-LED is powered through this. Note that this is only relevant if you are using the controller. You then connect the SATA-cable to your PSU. 1-2: Indicates that the fans should be chained together with each other before connecting the last connector to the RGB controller.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |